Friday, August 6, 2010

How to configure NewCs + cam accurate

I got many feedbacks from my post how to CCcam+NewCs and decide do too updated version.

1: Download and install NewCs from DM/Relook/Dbox bluepanel and Newcs config. NewCs.xml you can find from your box: var/tuxbox/config. For NewCs edit you use DCC (DreamBox Control Center). Do not edit it with Noteapad!!!

Now here is correct configuration example of NewCs.xml

2:

Code:

    
        
            SCI Lower Slot
            sci
            368
            /dev/sci0
            odd
            normal
            Yes
            Yes
            No
            No
            No
            Yes
            no
            34000
            Yes
            0000
            round
        
        
            SCI Upper Slot
            sci
            368
            /dev/sci1
            odd
            normal
            Yes
            Yes
            No
            No
            No
            Yes
            no
            34001
            Yes
            0000
            round
        
    
    
            Yes
            10001
            
                localhost
            
    
    
            20
            -1
    
    
        
            8080
            yes
        
        
            newcs
            newcs
            admin
        
    
    
            NewCSpwd
            simple
            internal
            all
            console,tcp
            1001
            normal,init
    
    
            Yes
            newcs
            01 02 03 04 05 06 07 08 09 10 11 12 13 14
            
                user1
                user1
                localhost
                34000
                on
                off
                No
                lower
            
             
                user2
                user2
                localhost
                34001
                on
                off
                No
                 Upper
            
             
                peer1
                peer1
                localhost
                34000
                on
                off
                No
                lower
            
             
                peer2
                peer2
                localhost
                34001
                on
                off
                No
                Upper
           
3: Lower and upper Card Readers means which slot you're card is in. My example is made for both. DM500s/Relook200s uses always lower Card Reader settings. DM70xx/relook400s models have 2 card readers.

4: you can change lower and upper Card Readers port (default is lower 34000 and upper 34001) what kind to u want but u can´t change it to port what CCcam use like 12000 !!!
Lower card reader port: 34000
Upper card reader port: 34001

5: Users: user1 in my example is you're own account for lower Card Reader. Set user name and password what ever u like, but never use dummy/dummy because it is a security hole and easy to guess for anyone who wan't to try and hack into the server. Others can log into you're server and use dummy/dummy if they know your dns!

6: Users: user2 in my example is you're own account for lower Card Reader. If Here too change from default username and password your own new one!

user1 (lower) and user2 (upper) are made for Cam (CCcam,gBox,Mgcamd etc) what you run in your box over what card opens channels in your own box from
NewCs.

7: How to make a link line from Newcs to Cam over what can (example CCcam) read the card info from NewCs:
Log with DCC to the box and go to var/etc/CCcam.cfg and edit there new N: line based from user1 (lower Card Reader) NewCs.xml account:

For user1 (lower Card Reader) you do so CCcam.cfg:
Code:
N: Dreamboxlan Ip 34000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
For user2 (upper Card Reader) you do so CCcam.cfg:
Code:
N: Dreamboxlan Ip 34001 user2 user2 01 02 03 04 05 06 07 08 09 10 11 12 13 14
And take please # away if u edit available empty N: line.

For user1 (lower Card Reader) with Mgcamd/newcamd so:
Code:
CWS= Dreamboxlan Ip 34000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
For user2 (upper Card Reader) with Mgcamd/newcamd so:
Code:
CWS= Dreamboxlan Ip 34001 user2 user2 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Dreamboxlan Ip means that you put there your DM/relook/Dbox current LAN IP address like 192.168.120 or what you have there!!!

8: Save CCcam.cfg and start CCcam+Newcs and wait for picture to appear. If everything went ok, there should be a picture now.

9: Let's add some new peers to who you want give a new N: line.
From my example you can see peer1 (lower card reader) and peer2 (upper card reader)

10: But first log into your router, and make a new portforward rule for port 34000 to your box.
If you are also using the second card reader, remember to also forward port 34001.

11: Give you're peer's N: line like this:
Code:
N: yourDNS/IP 34000 peer1 peer1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Code:
N: yourDNS/IP 34001 peer2 peer2 01 02 03 04 05 06 07 08 09 10 11 12 13 14
These N lines does not have to go in you're own CCcam.cfg. It's for you're peer.

With Mgcamd/newcamd so:
Code:
CWS= yourDNS/IP 34000 peer1 peer1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Code:
CWS= yourDNS/IP 34001 peer2 peer2 01 02 03 04 05 06 07 08 09 10 11 12 13 14
yourDNS/IP means: it is your outside IP addres or from your made DNS name to mask your real IP from others. Free DNS names you can create here: No-IP - Dynamic DNS, Static DNS for Your Dynamic IP or https://www.dyndns.com

12: Newer newcs version have now added webconfig option too and to there acces u add that into your web brouser:
http://192.168.x.xx:8080
your newcs server lan IP ofcourse. Thereu can add/delete new peers easy way and no need to log to server at all what makes things lot easyer.

If you made correct your peers have access to your card/cards directly.
You can add as many peers in Newcs.xml as you like. Until now there is no limit here.

My NewCs.xml example is made with cards default speed 3.57mhz (357). If you want try to overclock the card then rise slow numbers like 400 means 4.00mhz and so one.
Beware with card overclock you can damage your card permanently!!!


Some people has asking from me Windows NewCs.xml configuratsion, here it is.

Code:

    
        
            Phoenix on Com1
            phoenix
            368
            COM1
            odd
            normal
            Yes
            Yes
            No
            No
            No
            Yes
            no
            34000
            Yes
            0000
            round
        
    
    
            Yes
            10001
            
                localhost
            
    
    
            20
            -1
    
    
        
            8080
            yes
        
        
            newcs
            newcs
            admin
        
    
    
            NewCSpwd
            simple
            internal
            all
            console,tcp
            1001
            normal,init
    
    
            Yes
            newcs
            01 02 03 04 05 06 07 08 09 10 11 12 13 14
            
                user1
                user1
                on
                off
                No
            
                        
                peer1
                peer1
                on
                off
                No
                       
    
Most basics are same like my upper DM and co NewCs.xml.
COM1 is for external card reader devise and points to hadware port what you use (USB1/USB2/COM1/COM2 etc). But all others configuratsions are similar with DM/Rellok/Dbox etc config.

0 comments:

Post a Comment