HowTo DM7000-20 with HDD, CF card and USB

Best way to use both or all three in DM 7020 is:



1.) Install hdd as master on first ide controller

2.) Put the CF into (the slot is second ide controller), also as master

3.) Put the original DM 7020 - Image into the flash!

4.) Start the DM image from flash

5.) If not done, format hdd

6.) Start FlashWizardPro on your PC

7.) Format CF-Card from FlashWizardPro and install CF-card for MultiBoot

8.) Load one (or more) image(s) you like with FlashWizardPro to your CF card

9.) For USB the is no ide controlle needed but same procedure, put USB in USB slot

10.) Start FlashWizardPro, running an Image from Flash

11.) Format/Install USB for MutliBoot

12.) Copy Image(s) with FlashWizardPro to USB-Stick



That's it, from now, you can manage CF and USB with FlashWizardPro, don't need to boot the DM-Image (its'alone needed to format CF if you get problems!)